top of page

LUM GmbH

S. A. Pishro Ltd. has served as LUM GmbH's exclusive representative in Iran for a decade. LUM GmbH develops instruments for dispersion analysis, particle characterization and materials testing. Its instruments support real-time and accelerated measurements.

  • Dispersion analysis

  • Stability analysis

  • Separation analysis

  • Particle sizing

  • Materials testing

LUM analysers are used in the chemical, food, cosmetics and pharmaceutical industries, among others.

LUMiSizer® | All-in-One Dispersion Analyser

The LUMiSizer® is an all-in-one dispersion analyser for research, development, quality assurance and quality control. It measures demixing, consolidation, velocity distribution in a centrifugal field and particle size distribution.

Using patented STEP-Technology®, it can analyse up to 12 dilute or concentrated suspensions or emulsions simultaneously. Different types of sample cells and physical references can be used in the same run.

The instrument can accelerate stability testing by a factor of up to 4,500 compared with conventional test-tube tests. It can rank stability and assess shelf life in undiluted dispersions in minutes or hours instead of months or years.

This multisample analytical centrifuge helps characterize particle interactions and the compressibility of particles, flocs, gels and sediments. It can analyse dispersions across a range of concentrations, viscosities, compositions and particle sizes.

lumisizer info.jpg

LUMiFuge® | Accelerated Stability Analysis

The LUMiFuge® classifies and quantifies demixing and measures the stability and shelf life of dispersions. It is designed for process optimization, quality assurance, quality control and research.

Patented STEP-Technology® lets the instrument analyse up to eight dilute or concentrated suspensions or emulsions simultaneously. Different sample cell types and physical references can be used in the same run.

The analytical centrifuge can accelerate demixing by a factor of up to 2,300 compared with conventional test-tube tests. Stability tests and shelf-life assessments of dispersions at their original concentration can be up to 2,500 times faster than test-tube tests under normal gravity.

The analyser supports a range of sample types and test parameters.

lumifuge info.jpg

LUMiReader® and LUMiReader® PSA | Optical Dispersion Analysis

The LUMiReader® measures the transmitted-light extinction profile across the full sample height. Its optical block and temperature-control element can be controlled independently.

The PSA module supports high-resolution particle sizing and measures the velocity distribution of separating particles without requiring material constants such as viscosity or density.

The optical design minimizes changes in light intensity and bending across the sample. Each detector uses more than 9,000 high-sensitivity microscale sensors to measure local changes without scanning the sample.

The patented tilt technology uses the Boycott effect to increase the separation rate at 1 g. Rates can increase by a factor of up to 10 depending on the tilt angle, vial dimensions and sample type.

The instrument supports a range of viscosities, temperatures and concentrations. It can observe creaming, sedimentation, coalescence, aggregation and flocculation concurrently at the original product concentration.

The analyser comes certified and calibrated at the factory.

lumireader info.jpg

LUMiReader® X-Ray | Analysis of Concentrated Dispersions

The LUMiReader® X-Ray analyses dispersibility, stability, separation and consolidation in samples ranging from transparent to opaque. Suitable samples include emulsions, suspensions, sludges, slurries, foams and powders.

The instrument combines X-ray imaging with STEP-Technology® for high spatial resolution and short sampling intervals. A special crystal provides monoenergetic, parallel X-rays. More than 1,600 detectors record transmission across the full height of a 20 mm sample cell.

The instrument converts transmission profiles into stability and separation rates. It can also calculate particle concentration, sediment packing density and X-ray attenuation from the extinction profiles.

The analyser measures changes in real time without invasive or destructive sampling. It can study samples at their original concentration when dilution is impractical or would change the results.

Applications include ceramics, cosmetics, pharmaceuticals, paints, pigments, construction materials, fillers, mining and the petroleum industry.

The analyser comes certified and calibrated at the factory.

lumireader x-ray info.jpg

LUMiCheck® | Dispersion Stability Testing

The LUMiCheck® measures demixing for research, development and quality control. It supports rapid stability analysis and particle characterization when comparing similar dispersions.

Up to eight concentrated or diluted dispersions can be measured independently in separate sample cells. The instrument has a touchscreen, SD card storage and an optional battery for field use.

The instrument supports quantitative comparisons and qualitative assessment of demixing, flocculation, sediment formation and stability. Applications include food, beverages, construction materials, lubricants, fuels, emulsions and suspensions.

lumicheck info.jpg

LUMiFrac® | Adhesion and Cohesion Testing

The LUMiFrac® measures adhesion, cohesion, tensile strength and shear strength in N/mm². It received the 2012 Berlin-Brandenburg Innovation Award. Read the 2012 award announcement.

The analyser applies an increasing radial centrifugal force to specimens and measures the rotational speed at fracture. SEPView automatically calculates and displays the critical force or strength at failure in real time.

The software can compare results, calculate statistics and account for fracture-pattern data. The instrument can test up to eight samples at once without clamping. This multisample design can reduce measurement time by up to 85%.

Applications include coatings, wood products, automotive and aircraft composites, adhesive tapes, multilayer films and bonded optical components.

Test stamps cover a range of material combinations and applied loads. Dedicated tools are available for sample preparation.

LUMiFrac® for adhesion and cohesion testing.

lumifrac info.jpg
Logo

S. A. Pishro Ltd. Office

Unit 8, No. 7 Maryam Alley, Sorena St., North Sohrevardi St.
Tehran 1576995619, Iran

​​

info@sapishro.com

​​

+98 21 8850 7927  | Phone

+98 21 2291 4611  | Fax
+98 935 118 1560  | Mobile
​​

bottom of page